Poynting Antennas V3 Directional Cross Polarised LTE MIMO Antenna XPOL-2-5G


The XPOL-2-5G Outdoor 4G/5G LTE 11dBi Cross Polarised Directional Antenna is Poynting’s third gen”V3″ of this Cross Polarised, cellular band, 2×2 MIMO antenna.

SKU: XPOL-2-5G Category: Tags: , , , ,


**no wall mount included, wall mount sold separately

IMPORTANT NOTE: This antenna does NOT support the 1400MHz cellular frequencies (Band 32), which are used by Three and Vodafone in some areas of the UK. Please check prior to purchase.

Key Features
  • Exceptional over the main 4G/5G bands
  • Wideband 2×2 MIMO 4G/5G antenna
  • Backwards compatible 2G/3G/4G/LTE antenna (5G Ready)


The antenna enclosure effectively looks the same as the second generation “V2” but has been completely redesigned on the inside. We have used advanced metamaterial technology, making use of Artificial Magnetic Conductors (AMC) and new registered/patent pending radiator configuration, which is proving to yield exceptional improvements in bandwidth and gain. Radiation patterns of this antenna are exceptionally well controlled, further adding to the performance of the antenna.

The XPOL-2-5G antenna includes the newer 3400 – 4200 MHz bands, which were not previously covered by our V2 and is suitable for 2G, 3G, 4G & 5G. This antenna performs exceptionally well in the following frequency bands: 617 – 960 MHz, 1710 – 2170 MHz, 2300 – 2700 MHz & 3400 – 4200 MHz in addition to the new bands, the gain in the 1700 MHz and 2.7 GHz is around 3 dB higher than the “V2” over the same frequency bands! Our “V2” antenna already outperformed most competitors over these bands, so this substantial improvement in gain shows the benefits of the new advanced materials and novel radiator design.

So, if it was a car, we installed an entirely new technology engine producing twice the power under the bonnet – it may look the same, but just wait until you turn the ignition on!

See data sheet below for more info:


Additional information


Electrical Specifications – Cellular

Frequency bands

698-960 MHz
1710-2700 MHz
3400-3800 MHz
Gain (max) Port 1 & 2

11 dBi
VSWR Port 1 & 2

Over 95% of the band
Feed power handling

10 W
Input impedance

50 Ohm (nominal)

Coax cable loss

0.35 dB/m @ 900 MHz
0.53 dB/m @ 2000 MHz
0.6 dB/m @ 2500 MHz
DC Short

Path to ground
Coax Cable & Connector Type – Cellular

Cable length

5m ±5%
Coax cable type

Twin HDF-195
Connector type

2 x SMA (Male)
With finger grips for easier connection
Note: The coax cables & connectors are factory mounted to the antenna
Antenna Overview



2×2 MIMO
Frequency Bands – Cellular & WiFi

Cellular frequency bands:
698-960 MHz
1710-2170 MHz
2300-2500 MHz
2500-2700 MHz
3400-3800 MHz
WiFi frequency bands:
2400-2500 MHz
Peak Gain

9 dBi @690-960MHz
10 dBi @ 1710-2700MHz
11 dBi @3400-3800MHz
Coax Cable Type

Twin HDF 195
Coax Cable Length

Connector Type

SMA Male
Mechanical Specifications

Product dimensions

255 x 255 x 80 mm

1.55 kg
Radome material

UV Stable SAN Marine ASA
Radome colour

Brilliant White
Pantone P 179-1 C
Mounting Type

Wall and pole mount (Z-shaped bracket included, pole mount sold separately)
Environmental Specifications, Certification & Approvals

Wind Survival

<120 km/h
Operating Temperature

-40ºC to +80ºC
Operating Relative Humidity

Up to 98%
Storage Temperature

-40ºC to +80ºC
Storage Humidity

5% to 95% – non-condensing
Environmental Conditions

Water ingress protection ratio/standard

Salt Spray

Flammability Rating

UL 94-HB, ECE-R118.02 Certified cables
Impact resistance

Product Safety & Environmental

Complies with CE, EN, CSA, RoHS and IEC standards, E-mark certified
Package Contents

1 x XPOL-2-5G antenna
1 x Z-shaped mounting bracket