Description
FEATURES
- 3.5″ Dynamic Balance® polypropylene woofers
- 3/4″ Anodised Aluminium Dome tweeter
- Bass Performance
- Durable
- Safe
Polk AtriumSAT300 Compact staked outdoor loudspeaker (single).
Can be planted in your landscaping, hung from your ceiling or the eaves, or installed anywhere you want to mix great sound with the great outdoors
Dynamic Balance® Driver Technology
3 1/2″ long-throw midrange driver with 1-inch voice coil, vented pole-piece, rugged butyl rubber surround and composite cone; 3/4″ composite dome neodymium tweeter.
Bass Performance
Capacitive Coupling Technology is an advanced signal-blocking technology that determines exactly where a small speaker usually skimps on bass output. Special circuitry then compensates by boosting response in this critical frequency range. More bass response means a wider dynamic range with more musical realism.
Tweeter Performance
Flying bridge-mounted tweeter never gets in the way of the woofer, for smooth, realistic sound in a compact housing.
ATRIUM SAT300 OUTDOOR LOUDSPEAKER | ||
Qty Included: | 1 | |
Height: | 7″ (17.78 cm) | |
Width: | 5.5″ (13.97 cm) | |
Depth: | 8.4″ (21.34 cm) | |
Weight: | 3.25 lbs (1.47 kg)- | |
Driver Enclosure Type: | Mineral-filled polypropylene cabinet | |
Driver Complement: | • (1) 3.5″ (8.89 cm) d (Round) Dynamic Balance driver with extended motor structure, composite cone and butyl rubber surround – Midrange / • (1) 0.75″ (1.91 cm) d (Round) Dynamic Balance polyurethane tweeter with neodymium magnet – Tweeter | |
Total Frequency Response: | 100 Hz → 22,000 Hz | |
Nominal Impedance: | 8 ohms | |
Sensitivity (1 watt @ 1 meter): | 83 dB | |
Lower and Upper -3dB Limits: | 115 Hz → 20,000 Hz | |
Recommended Amplifier Power Per Channel: | 10 watts → 100 watts | |
Mounting Type: | Wall bracket | |
Mounting Type: | Stake with security plate | |
Waterproof Rating: | IPX66 | |
Total Pieces: | 1 | |
Included Accessories: | (1) Ground Stake, (1) Security Plate,(1) Pendant Cap, (1) Rubber Bumper, (1) Eyebolt, (2) Fasten Connectors, (1) Registration Card, (1) Mounting Template, (1) #10 Pan Head Screw, (2) #6 Pan Head Screws, (1) Lock Washer, (2) Wire Nuts, (1) Owner’s Manual |