Description
Lutron’s Occupancy Sensor is a Radio Powr Savr sensors, which automatically turn lights on when you walk into a room and off when you leave. Available in corner mount options for the right amount of coverage in any room. This sensor comes in white.
Lutron Radio Powr Savr wall-mounted occupancy and vacancy sensors are wireless, battery-powered, passive infrared (PIR) sensors that automatically control lights via RF communication to compatible dimming or switching devices. These sensors detect the heat from people moving within an area to determine when the space is occupied. The sensors then wirelessly transmit the appropriate commands to the associated dimming or switching devices to turn the lights on or off automatically. They combine both convenience and exceptional energy savings along with ease of installation.
Main features:
- Wireless occupancy sensor has 3 settings available:Auto-On/Auto-Off, Auto-On Low-Light/Auto-Off, andManual-On/Auto-Off
- Auto-On Low-Light feature will turn lights on automatically only if there is less than approximately 10 Lux (1 fc) of ambient light
- Uses Clear Connect technology
- Passive infrared motion detection with exclusive Lutron XCT Technology for fine motion detection • 360˚ coverage ranges from 324 ft2 (30.2 m2) to 676 ft2 (62.4 m2), depending on mounting height
- Simple and intuitive adjustments available for Timeout, Auto-On, and Activity settings
- Supports advanced occupancy features, such as dependent occupancy groups and customizable occupied/unoccupied presets in some systems
- Multiple sensors can be added for extended coverage.Refer to product specification submittal of receiving device to determine system limits
- Lens illuminates during test mode to verify ideal locations
- Multiple ceiling-mount methods available for different ceiling materials
- Front accessible test buttons make programming easy
- 10-year battery life design
- RoHS compliant
Specification
lutron powr Savr lrf3-ocr2b-p-wh-pdf
| Power and Performance | Operating voltage: 3V Operating current: 14 μA nominal Requires one CR 123 lithium battery 10 year battery life design Non volatile memory. Saved changes are stored during power loss |
| RF Range | Distance between local load controls and sensor should not exceed 18m / 60ft line of sight or 9m / 30ft through walls |
| Sensor Coverage Test | Front accessible test button Lens illuminates orange in response to motion during test mode and is visible from 18m / 60ft |
| Wireless Communication Test | Front accessible test button Turn associated loads on and off |
| Timeout Options | 1 minute. Intended for use in high activity, briefly occupied areas only 5 minutes 15 minutes. Default setting 30 minutes |
| Sensitivity Options | Low activity. D efault setting Medium activity High activity |
| Finish | White |
| Environment | Temperature: 0°C / 32°F to 40°C / 104°F Relative humidity: less than 90% non condensing For indoor use only |
| Dimensions | Height: 90.7mm / 3.57″ Depth: 28.7mm / 1.13″ |
| Regulatory Approval | CE marked European Union TRA type approved CITC type approved |
| Warranty | 5 year limited warranty |
