Cambium WiFi 6 Indoor wall access point with 3 point switch

£334.00

Cambium XV2-22H Wi-Fi 6 2X2 Indoor wall access point with 3 port switch

Description

Small, compact rooms present a challenge to designing good Wi-Fi coverage and as such this Access Point successfully eliminates these challenges.

The XV2-22H includes gigabit Ethernet ports to connect devices such as a TV set top box and PoE out to connect a VoIP phone directly to the wall plate access point. To connect IOT devices, the XV2-22H has a dual purpose radio that operates as either a Bluetooth radio or an 802.15.4 ZigBee radio.

Two electrically connected RJ45 pass through ports are positioned on the rear for any secondary data signal on the same structured cabling junction box. Utilising the RJ45 cable supplied, as a jumper cable, this will enable the bottom port for 1GB connectivity to use with the optional desk mount bracket, whihc is purchased separately.

Manage the XV2-22H using cnMaestro™, cloud or on premises, XMS-Cloud or Swift app based management. This management flexibility allows the XV2-22H to be tailored to meet end user or managed service provider requirements with layer 7 application policy controls, location services, BYOD security segmentation or part of a wireless fabric architecture spanning outdoor broadband, Ethernet switching, and enterprise Wi-Fi.

Each box contains a single gang mounting bracket, The junction boxes measure 51mm by 76mm or 2″ x 3″ and a 50mm long RJ45 cable

  • Wallplate 802.11ax, 2×2
  • 3 x GbE Ethernet, one with PoE out
  • RJ45 electrical pass-through ports
  • Integrated dual purpose IoT Ready BLE or Zigbee
  • 802.3af or 802.3 PoE Powered device

If you’re looking for this product to be installed in your home, our specialist installation team can help. Contact us online or visit our showroom to chat.

 

Additional information

Weight 0.42 kg
Dimensions 16 × 10.5 × 16 cm
Specification

Antenna Type 5GHz 5.56dBi Omni
2.4GHz 4.47dBi Omni
Radios 5GHz 802.11a/n/ac/ax, 2×2
2.4GHz 802.11 b/g/n/ax, 2×2
1 x 802.15.4 or 1 x 802.15.1 IoT transceiver, multi protocol
WiFi 802.11 a/b/g/n/ac Wave 2/ax
SSID Security WPA3, WPA2 (CCMP, AES, 802.11i), WPA2 Enterprise (802.1x/EAP), WPA PSK (TKIP),WEP, Open
WLAN 16 WLAN profiles per radio, 128 clients per radio
Fast Roaming 802.11r, OKC, cnMaestro assisted roam
PHY Rate 2.4GHz 574Mbps
PHY Rate 5GHz 2,402Mbps
Mesh Multi hop (2) either band
Interface 3 x Gb Ethernet uplink
2 x PoE in and 1 x PoE out (up to 10W), passthrough
Power 802.3af or 802.3at powered device
Operating Temperature -40°C / -40 °F to 65°C / 149°F
Storage Temperature -40°C / -40°F to 70°C / 158°F
Dimensions Height 16cm / 6.3"
Width 10.5cm / 4.1"
Depth 3.2 cm / 1.26"
Weight 0.417 kg / 0.92 lb
Included
Single gang mounting bracket

Wall mount or desk mount bracket optional

50mm long RJ45 cable

Guide

https://storage.googleapis.com/habitech_product_information/Cambium/Brochures/WirelessThatJustWorksBrochure.pdf